HAVIT Multifunctional 360° ultra high-quality material: The table lever is made of stainless steel, with the E1 environmental thumb plate, unbreakable plastic processing, and the ABS technology material, makes the laptop desk KSR-01 durable and not damaged.
Laptop deck or mouse deck can be rotated by 360°. Important after assembly: Fill the cavities of the black container and the column (both can be closed with a rubber stopper) for best stability.
In the package (from Pearl!) Were called: Notebook table – 3 parts; Fastening material; Operating instructions => BUT: If you see the photo below, you will find something more * smile *.
The composition was nevertheless feasible, even if the instruction manual here and there stimulated to think (see the unspecified different screw heads or the red rubber pad). An allegedly additional tool (long Kreuzschlitzschreubdrreher) was NOT extra necessary since it was lying thereby. So a mixture of good and bad!
Composed the table works really well if the “Balasttank” on the reels really (filled with quartz sand – about 5kg and still remaining place or with diving leach granules). Because this balast is really needed by the long lever arm, otherwise the car kicks over (I put a 17 “and a 12” -zoller plus the hand-hand put together too quickly too much weight).
The sliding on the rubberized rollers is a real pleasure on a floor of a floor and a short pile industrial carpet.
Also, the tiles are taken carelessly (see photos). The height change is also effortless, but it is always true to keep the tabletop with the notebook. Without this measure, the arm would descend to the lowest point. All other motions – also the inclination of the notebook table – happen very easily. But this is where a deficiency nowhere
Explained: The unstretched mouse tray is practically no longer reachable in this case (see photo), as long as you do not have the idea, in the accompanying instructions, of removing this tray 12 cm laterally. But this mouse pad is already a big deal: for mice, which respond to a manual shifting (which is probably the most common mice), this is much too small (15.5 cm x 17 cm). Although the mouse tray can be moved to either side or to the front, can be moved to the side, one can not lift around a continuous uplift and resume. Ergo: If you can handle a dormant mouse, you can use the mouse pad very well. Otherwise only the notebook installed in the notebook. For mobile mice, it quickly becomes very scarce.
The ringing can only be limited if the total lever arm is very short OR if the notebook allows a handheld, which means that the oscillations in the 10-finger system are largely omitted.
But because everything else is going really well and the maneuverability in all directions is just great, it is a scarce five-star part for me.
Let’s see if I get the photos uploaded.
A handling tip: Both the metal column and the foot tank can be filled. The foot tank should ideally be filled with quartz sand BEFORE mounting. Justification: The filling hole is very small. A bundled paper bag can serve as a funnel. The tank must be shaken several times to fill it completely. When installed, some sand will almost slip between the tank and the metal column. Since sand acts like abrasive paper, it scratches the paint there minimally. Furthermore, the shaking of the assembled table is much more difficult to handle from the handling point of view.
In my case with a 2.3 kg 17-inch notebook, it was sufficient to fill only three-thirds of the tank. The column remained empty. Even with a wide outrigger, this weight was sufficient against any threat of tilting.